Rated Input Voltage
|
200V Class Single Phase & Three Phase: (200-240V)
|
400V Class Three Phase: (380-480V)
|
Allowed Variation: +10% to -15%
|
Rated Frequency
|
50/60 Hz. Allowed Variation: +/-5%
|
Control Method
|
V/F Control, Open Loop current Vector control and PM open loop vector for use with IPM/ SPM (Sine Wave PWM)
|
Frequency Control Range
|
0.01 to 400 Hz
|
Frequency Setting signal
|
Main frequency reference: 0 to 10 Vdc (20k), 4 to 20 mA (250), 0 to 20 MA (250)Pulse Train Input (Max 33 kHz) or Memo bus Communication
|
Speed Control Range
|
1:00 (Open Loop Vector Control), 1:40 (V/f Control), 1:10 (PM Open Loop Vector Control) (Excludes temperature fluctuation when performing rotational auto- tuning for induction motors)
|
Braking Torque
|
Continuous Regen Torque: 20%, 125% with a braking Resistor Unit (10% ED) for 10s
|
Overload
|
Heavy Duty: 150% for 60Sec
|
Normal Duty: 120% for 60 Sec
|
Drive Functions
|
Momentary power loss ride- thru, speed search, Over torque Detection, Torque Limit, Multi-Step speed (17 steps max), Accel/Decel time switch, S- Curve Accel/Decel,3-Wire Sequence, Rotational Auto- Tuning, Stationary Auto-Tuning of line- to- line resistance, on- line tuning, Dwell, Cooling fan On/off, Slip compensating, Torque Compensation, Frequency Jump, Frequency Reference Upper/Lower Limit, DC injection braking (start and stop),High Slip Braking, PID Control (with Sleep Function), Energy Saving, MEMO BUS (RS-485/422 Max 115.2 kbps), Fault Reset, Parameter Copy
|
Protection
|
Motor/Inverter Overload, Momentary Over current, Mains Under voltage, DC Bus over voltage, Heat sink Overheat, Stall Prevention, Over torque, Under torque, Input/Output Phase loss, Output Ground Fault
|
Monitors
|
Reference Frequency, Output Frequency, Output current, Output voltage, Output power, KWh, Input/output terminal status, PID Parameters, Component life monitors for IGBT, Capacitor & fan, fault status & fault history, communication status
|
Input/Output
|
Digital: 7 nos. Inputs/3 nos Outputs, 24V DC
|
|
Analog: 1 no Input (0-10V or 0/4-20MA) 1 no Output (0-10V) Pulse: One no Input & One no Output, 0-32 KHz Safe I/O: One no Safety Input as per EN 954-1 Safety Category3: EN61508 SIL2
|
Storage/Installation Area
|
Indoors free from oil mist, dust, harmful gases, liquids & radioactive material
|
Ambient Temperature
|
-10 to +50C (Open Chassis), -10 to +10C (NE MA 1)
|
Humidity
|
95% RH or less with no condensation
|
Storage Temperature
|
-20 to +60C
|
Altitude
|
1000m or less
|
Standard Compliance
|
RoHS complaint
|